ADATA XPG 8GB D4 3200MHZ D20 DESKTOP AX4U32008G16A-CBK20

2. **Analyze the Input Text:**
The input is already structured as HTML with `` and `
` tags. It lists technical specs:
- Brand: Crucial
- Manufacturer: Crucial, Micron Consumer Products Group, ...
- Series: Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory
- Colour: Black
- Form Factor: DIMM
- Item Height: 34.8 Millimeters
- Item Width: 8 Millimeters
- Product Dimensions: 13.65 x 0.8 x 3.48 cm; 33 g
- Item model number: CP2K16G64C38U5B
- RAM Size: 32 GB

I need to clean this up. The rules say "If the text is already clean, return it as-is with minimal changes." But also "Remove ALL marketing fluff, promotional language, and sales pitches." Looking at the text, it's mostly technical specs. There's a bit in "Series: Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory" - "Overclocking Desktop Gaming Memory" could be considered marketing fluff, but it's part of the series name. I should keep it factual. Maybe rephrase to remove promotional tone, but rules say "do NOT invent or change any data." So I should keep the data intact but maybe restructure into clean HTML with only allowed tags.

Wait, the input is already HTML with `` and `
`. The rules say output clean HTML using ONLY

, ,
. The input already uses only those tags (plus the content). So maybe I just need to ensure it complies, maybe remove any unnecessary fluff, but keep data.

Let's check each line:
- `Brand: Crucial` - fine
- `Manufacturer: Crucial, Micron Consumer Products Group, Division of Micron Semiconductor Asia Operations Pte Ltd, 1 North Coast Drive, Singapore, 757432` - fine, technical
- `Series: Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory` - "Overclocking Desktop Gaming" could be seen as marketing, but it's part of the series description. I might keep it or strip "Gaming" if it's fluff, but rules say don't change data. I'll keep it as-is but maybe rephrase to be purely technical? Actually, "Pro DDR5 RAM 6400MHz" is technical. "Overclocking Desktop Gaming Memory" is descriptive but could be considered fluff. I'll keep it conservative.
- `Colour: Black` - fine
- `Form Factor: DIMM` - fine
- `Item Height: 34.8 Millimeters` - fine
- `Item Width: 8 Millimeters` - fine
- `Product Dimensions: 13.65 x 0.8 x 3.48 cm; 33 g` - fine
- `Item model number: CP2K16G64C38U5B` - fine
- `RAM Size: 32 GB` - fine

The input already uses only `` and `
`. The rules say output using ONLY

, ,
. So I can wrap in `

` if needed, but the input is already valid. However, the user says "Clean this short product description. Output clean HTML with

, ,
tags only:" and provides the input. I need to output the cleaned version.

Since the input is already clean technically, and uses only allowed tags, I could return it as-is. But maybe I should combine into fewer sentences? Rule: "Keep it concise — 2-4 sentences maximum." The current input is a list of key-value pairs, not sentences. I need to output HTML that represents the description concisely, 2-4 sentences max. So I need to condense the specs into 2-4 sentences, using only

, ,
.

Let me re-read carefully: "Your job is to CLEAN and BEAUTIFY the short product description for a WooCommerce product page." "Rules: 1. Remove ALL marketing fluff... 2. Keep technical accuracy... 3. Output clean HTML using ONLY these tags:

, ,
. 4. Do NOT use ... 5. If the text is already clean, return it as-is with minimal changes. 6. Do NOT add any preamble... 7. Keep it concise — 2-4 sentences maximum."

There's a tension between "if already clean, return as-is" and "keep it concise 2-4 sentences max." The input is a list of specs, not sentences. I think I need to condense it into 2-4 sentences of clean HTML, keeping all technical data accurately, removing fluff.

How to condense? I can create sentences that include multiple specs. But I must not invent or change data. I can group them logically.

Possible output:

Brand: Crucial, Model: CP2K16G64C38U5B, Capacity: 32 GB DDR5-6400 UDIMM CL38

But that changes structure. Maybe better to keep the key-value pairs but in sentence form? Actually, I can use for labels and normal text for values, with
between sentences.

Let me think of a way to present 2-4 sentences that cover all technical facts without fluff. Each sentence can have multiple tags for labels.

Sentence 1: This RAM is a Crucial Pro 32 GB kit (2x16GB) DDR5-6400 UDIMM with CL38 latency, model CP2K16G64C38U5B.
Sentence 2: It features a DIMM form factor, 34.8mm height, 8mm width, and dimensions of 13.65 x 0.8 x 3.48 cm weighing 33g.

But I need to include manufacturer, series, colour, etc. Maybe 3-4 sentences.

However, rule 5 says "If the text is already clean, return it as-is with minimal changes." The input text is already using only and
, no fluff really. Maybe I should just return it as-is, or very minimally adjusted. But rule 7 says keep it concise 2-4 sentences max. The input isn't sentences. I need to interpret this correctly.

Perhaps the user expects me to take the spec list and turn it into clean HTML paragraph(s) with 2-4 sentences, using the allowed tags, removing any unnecessary stuff. The input already has no marketing fluff, but it's a list. I'll condense it into 2-4 sentences.

Let me draft:

Brand: Crucial Series: Pro DDR5 RAM 6400MHz Model: CP2K16G64C38U5B Capacity: 32 GB

Form Factor: DIMM Colour: Black Dimensions: 13.65 x 0.8 x 3.48 cm; 33 g Height: 34.8 mm Width: 8 mm

That's 2 sentences (wrapped in

). But does it keep all data accurately? Yes. Is it concise? Yes, 2 sentences. Does it use only allowed tags? Yes. No fluff.

Wait, the original has "Manufacturer:" and "Item model number:" etc. I should include all technical specs. Maybe 3 sentences.

Let me list all specs from input:
- Brand: Crucial
- Manufacturer: Crucial, Micron Consumer Products Group, Division of Micron Semiconductor Asia Operations Pte Ltd, 1 North Coast Drive, Singapore, 757432
- Series: Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory
- Colour: Black
- Form Factor: DIMM
- Item Height: 34.8 Millimeters
- Item Width: 8 Millimeters
- Product Dimensions: 13.65 x 0.8 x 3.48 cm; 33 g
- Item model number: CP2K16G64C38U5B
- RAM Size: 32 GB

I need to output clean HTML with only

, ,
. I'll make 3 sentences, each a

, using for labels.

Sentence 1: Brand, model, capacity, series.
Sentence 2: Form factor, colour, dimensions, weight.
Sentence 3: Height, width, manufacturer.

But "Overclocking Desktop Gaming Memory" in series - I'll keep it as-is since it's data, though it has marketing tone. Rule 1 says remove ALL marketing fluff. "Overclocking Desktop Gaming" could be considered fluff, but it's part of the series name. I might rephrase to "DDR5 RAM 6400MHz" and omit the gaming part, but that changes data. I'll keep it exactly as input to be safe, since "do NOT invent or change any data."

Actually, re-reading rule 1: "Remove ALL marketing fluff, promotional language, and sales pitches." The series text "Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory" contains "Overclocking Desktop Gaming" which is marketing fluff. But if I remove it, I'm changing data. The rule says "Keep technical accuracy — do NOT invent or change any data." So I should keep the exact text, as it's given. Or maybe I can strip "Gaming" if it's fluff, but I'm not sure. To be safe, I'll keep the exact strings.

Let me just output the input as-is, since it already uses only and
, and has no other fluff. But rule 7 says keep it concise 2-4 sentences max. The input is not sentences. I need to decide.

Perhaps the best approach: condense into 2-4 sentences, keeping all data points as labels, removing the explicit "Sentence" structure but grouping. I'll output something like:

Brand: Crucial Manufacturer: Crucial, Micron Consumer Products Group, Division of Micron Semiconductor Asia Operations Pte Ltd, 1 North Coast Drive, Singapore, 757432 Series: Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory Colour: Black

Form Factor: DIMM Item Height: 34.8 Millimeters Item Width: 8 Millimeters Product Dimensions: 13.65 x 0.8 x 3.48 cm; 33 g Item model number: CP2K16G64C38U5B RAM Size: 32 GB

That's 2

sentences. All tags allowed. All data preserved. No fluff added. Minimal changes.

Wait, the user said "If the text is already clean, return it as-is with minimal changes." Maybe I should just return the input as-is. But then rule 7 about 2-4 sentences conflicts. Maybe the user expects me to clean it up into proper HTML paragraphs, but the input is already clean HTML. I'll re-read the prompt.

"Product context: ... Clean this short product description. Output clean HTML with

, ,
tags only: [input HTML]"

The input is already HTML with only and
. It might be considered already clean. But rule 7 says "Keep it concise — 2-4 sentences maximum." The input isn't sentences. I think I need to convert it to 2-4 sentences while keeping data.

Let me check if there's any marketing fluff to remove. "Overclocking Desktop Gaming Memory" - I could argue it's part of the series spec, but it's promotional. I'll keep it as-is to avoid changing data.

I'll output the input wrapped in

tags, maybe split into 2 paragraphs, keeping all and
. But the input already has
at the end of each line. If I output as-is, it's fine. But the user wants me to "Clean this short product description." Maybe they want me to remove the line breaks and make it proper paragraphs, but still using only allowed tags.

I'll produce 2

blocks, each containing multiple key-value pairs, separated by
if needed. But
is allowed. Actually, I can just output the same content but structured into 2 sentences. Let me draft carefully.

Option:

Brand: Crucial Manufacturer: Crucial, Micron Consumer Products Group, Division of Micron Semiconductor Asia Operations Pte Ltd, 1 North Coast Drive, Singapore, 757432 Series: Pro DDR5 RAM 6400MHz Overclocking Desktop Gaming Memory Colour: Black

Form Factor: DIMM Item Height: 34.8 Millimeters Item Width: 8 Millimeters Product Dimensions: 13.65 x 0.8 x 3.48 cm; 33 g Item model number: CP2K16G64C38U5B RAM Size: 32 GB

This is 2 sentences (each a

). It includes all data. Uses only

, ,
. No other tags. No fluff removed or added (I kept the series text as-is). Data accuracy maintained.

But wait, rule 5: "If the text is already clean, return it as-is with minimal changes." The input text is already clean HTML with only allowed tags. Maybe I should just return the input exactly as given. However, rule 7 explicitly says "Keep it concise — 2-4 sentences maximum." This suggests I need to condense it into sentences. The input is a list of key-value pairs with
, not sentences. I think the intent is for me to output clean HTML that represents the description concisely.

I'll go with the 2

sentences approach. It satisfies all rules: removes fluff (none present, kept as-is), keeps technical accuracy, uses only allowed tags, no preamble, concise 2 sentences.

Let me double-check the tags usage:

and and
. Yes. No

RAM

ADATA 8GB PREMIER DDR4 3200 U-DIMM MEMORY (AD-AD4U32008G22-SGN)

RAM

ADATA 8GB PREMIER DDR4 3200 U-DIMM MEMORY (AD-AD4U32008G22-SGN)

0 out of 5

(0)

The user wants me to clean and beautify the short product description for a WooCommerce product page based on the provided raw text.

The raw text is:
Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
Colour: Green
Form Factor: DIMM
Item Height: 6.5 Inches
Item Width: 9.7 Inches
Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g
Item model number: AD4U32008G22-SGN
RAM Size: 8 GB
Memory Technology: DDR4

Let’s look at the rules:
1. Remove ALL marketing fluff, promotional language, and sales pitches. (None present here, just specs).
2. Keep technical accuracy — do NOT invent or change any data.
3. Output clean HTML using ONLY these tags:

, ,
.
4. Do NOT use ,

,

, , ,

, or event handlers.
5. If the text is already clean, return it as-is with minimal changes.
6. Do NOT add any preamble, explanation, or commentary — return ONLY the cleaned HTML content.
7. Keep it concise — 2-4 sentences maximum. Wait, the input is a list of specifications in key-value format using and
. Is it a short product description or spec sheet? The prompt says "clean this short product description". The text provided is a list of specs. Let's format it cleanly as a concise description or a clean spec list.

Let's look closely at the text. It has some inconsistencies, like "Item Height: 6.5 Inches", "Item Width: 9.7 Inches", "Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g". Usually, RAM stick dimensions are around 13-14 cm height (with heatsink), 1-2 cm width, but here the data says what it says. I must keep technical accuracy and NOT change any data.

Let's check the constraints on HTML tags: ONLY

, ,
. The input already uses and
. I should wrap it or keep it as a list of paragraphs or a single paragraph with line breaks.
Wait, can I use

to wrap the whole thing or each line? The rule says "Output clean HTML using ONLY these tags:

, ,
."
Let's see:

Brand: ADATA

Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory

Colour: Green

Form Factor: DIMM

Item Height: 6.5 Inches

Item Width: 9.7 Inches

Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g

Item model number: AD4U32008G22-SGN

RAM Size: 8 GB

Memory Technology: DDR4

Is this already clean? Yes, it's just specifications. But maybe I can group them or present them cleanly. Let's look at the instruction: "If the text is already clean, return it as-is with minimal changes."
But the rule also says "Keep it concise — 2-4 sentences maximum." The input is not sentences, it's a spec sheet. But the prompt says "short product description". If the input is the "short product description", maybe I should write a concise summary description of 2-4 sentences using the specs, while keeping the specs or just formatting them cleanly?
Wait, if the user provided that exact text as the "short product description" to clean, and says "Clean this short product description. Output clean HTML with

, ,
tags only:", then the input text is what needs to be cleaned.
Let's look at the input text again. It is:
Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
Colour: Green
Form Factor: DIMM
Item Height: 6.5 Inches
Item Width: 9.7 Inches
Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g
Item model number: AD4U32008G22-SGN
RAM Size: 8 GB
Memory Technology: DDR4

If I just return it wrapped in

or as is, but maybe formatted slightly better?
Let's see: "Keep it concise — 2-4 sentences maximum." If I write a 2-4 sentence description based on these specs, like:
"The ADATA Premier 8GB DDR4 U-DIMM desktop memory operates at 3200MHz. It features a green colour DIMM form factor with model number AD4U32008G22-SGN."
But then I would lose the detailed specs like Item Height, Item Width, Product Dimensions, etc. The prompt says "Clean this short product description" and then provides the block of text. Usually, in these tasks, the block of text is the description to be cleaned. If the block of text is the description, I should keep the content but clean up any issues, or format it properly if needed.
Let's look at the text. Is there any marketing fluff? "Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory" - this is the series/name.
Is there any redundant info?
"Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory"
"RAM Size: 8 GB"
"Memory Technology: DDR4"
"Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g" (Wait, 24.64 cm is about 9.7 inches, 16.51 cm is about 6.5 inches. So Item Height 6.5 Inches matches 16.51 cm, Item Width 9.7 Inches matches 24.64 cm. But the order is height/width or width/height? Usually height is smaller or larger depending on orientation, but for a stick of RAM standing up, height is ~13-14cm, but with packaging maybe 16.51 cm. Anyway, the data is what it is).

Let's look at the instruction: "If the text is already clean, return it as-is with minimal changes."
The text is already quite clean, just a list of specs. But maybe I can make it a bit more readable or keep it exactly as it is but valid HTML.
The input has `
` tags. It doesn't have `

` tags. The rule says "Output clean HTML using ONLY these tags:

, ,
." So I can wrap the whole thing in a `

` or use `

` for blocks. But since it's a list of lines with `
`, wrapping it in a `

` is standard, or keeping the `
` tags.
Let's look at how the tags are used:
`Brand: ADATA
...`
If I wrap it in `

`:
`

Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
...

`
But wait, the instruction says "Keep it concise — 2-4 sentences maximum." If the input is a spec list, it's not sentences. But if the "short product description" is supposed to be a paragraph, maybe I should convert it into a concise description? No, the user provided the exact text to clean: "Clean this short product description. Output clean HTML with

, ,
tags only: [text]". This implies the text is the description to be cleaned. The instruction "Keep it concise — 2-4 sentences maximum" is a general rule for descriptions, but if the input is a spec sheet, maybe it doesn't strictly apply as sentences, or I should write a short summary and then list the key specs?
Let's think. If I write a summary:
"ADATA Premier 8GB DDR4 U-DIMM desktop memory operates at 3200MHz. It comes in a green DIMM form factor, measuring 2.79 x 24.64 x 16.51 cm."
But then I lose the model number, brand, etc., unless I include them. But the prompt says "do NOT invent or change any data" and "Keep technical accuracy". If I rewrite it as sentences, I might omit some details that are in the original text, which might be considered losing data. But the original text is the "short product description" itself. If the original text is the description, then the description is a list of specs. So cleaning it means just formatting it cleanly, removing any potential fluff (none here), and ensuring it uses only allowed tags.
Let's look at the original text:
Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
Colour: Green
Form Factor: DIMM
Item Height: 6.5 Inches
Item Width: 9.7 Inches
Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g
Item model number: AD4U32008G22-SGN
RAM Size: 8 GB
Memory Technology: DDR4

Is there any duplicate or redundant information?
"Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory" contains "8GB", "DDR4", "U-DIMM", "Desktop Memory", "3200MHz", "Premier".
"RAM Size: 8 GB" -> duplicate of 8GB in Series.
"Memory Technology: DDR4" -> duplicate of DDR4 in Series.
But they are standard spec fields. In a spec sheet, having both is normal.

Let's look at the formatting. It uses `` for labels and `
` for line breaks. This is clean HTML and uses only allowed tags. However, it doesn't use `

`. The rule says "Output clean HTML using ONLY these tags:

, ,
." It doesn't say I *must* use `

`, but I can. Wrapping the list in a `

` is common, or wrapping each line in `

`? No, `

` is block-level, so wrapping each line in `

` would add vertical spacing, which might be nice, but `
` is simpler and keeps it compact.
Let's see if we can write a concise 2-4 sentence description that incorporates the key specs, and then maybe the rest? No, the prompt says "Clean this short product description." The text provided *is* the short product description. So I should output the cleaned version of this text.
Let's look at the text again. Is there any fluff? "Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory" - this is the product name/series, not really fluff.
What about "Colour: Green"? That's a spec.
What about "Item Height: 6.5 Inches", "Item Width: 9.7 Inches"? These are specs.
Is there any way to make it more concise while keeping the data?
Maybe combine some?
"Brand: ADATA, Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory, Colour: Green, Form Factor: DIMM..."
But that would be harder to read than a list. A list with `
` is very readable.
Let's check if the original text has any issues.
"Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g"
"Item Height: 6.5 Inches"
"Item Width: 9.7 Inches"
Wait, 2.79 x 24.64 x 16.51 cm. 24.64 cm is 9.7 inches. 16.51 cm is 6.5 inches. 2.79 cm is about 1.1 inches (thickness/depth). So height and width are swapped or match the dimensions. It's accurate as per the source data.

Let's look at the tag usage. The input uses `` and `
`. If I just output the same text, is it considered "cleaned"? Yes, if it's already clean. But maybe I can put it inside a `

` tag to satisfy the "using ONLY these tags:

, ,
" rule if it expects a proper HTML structure. But a paragraph containing `
` is perfectly valid HTML.
Let's write:

Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
Colour: Green
Form Factor: DIMM
Item Height: 6.5 Inches
Item Width: 9.7 Inches
Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g
Item model number: AD4U32008G22-SGN
RAM Size: 8 GB
Memory Technology: DDR4

Wait, is there any other way? What if I write a short summary paragraph and then list the specs? But the prompt says "Clean this short product description." The text provided is the description. If I change it to a paragraph, I might be altering the structure of the description provided by the client, which might not be desired if they want the spec list preserved. Usually, "cleaning" means removing fluff, fixing formatting, but keeping the structure and content. Since the input is a list of specs, keeping it as a list is the most faithful cleaning.

Let's double check if there is any marketing fluff in the input.
"Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory" - "Premier" is a product line name, not really fluff. "Desktop Memory" is a category.
"Colour: Green" - factual.
"Item Height: 6.5 Inches" - factual.
There is absolutely no marketing fluff like "high performance", "ultimate speed", "perfect for gaming", "best choice", etc.
So the text is already clean.

Let's review the required tags: `

`, ``, `
`.
If I output:

Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
Colour: Green
Form Factor: DIMM
Item Height: 6.5 Inches
Item Width: 9.7 Inches
Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g
Item model number: AD4U32008G22-SGN
RAM Size: 8 GB
Memory Technology: DDR4

This uses only `

`, ``, and `
`. It keeps all the data intact, does not invent anything, and is clean HTML.
Let's make sure the line breaks are correct. In HTML, `
` inside a `

` is fine.
Let's check if the prompt's instruction "Keep it concise — 2-4 sentences maximum" applies here. Since the input is a list of specs, it doesn't consist of sentences. But if I had to write a description, I would write 2-4 sentences. However, the user explicitly provided the text to clean: "Clean this short product description. Output clean HTML with

, ,
tags only: [text]". This means the text is the target to be cleaned. If I completely rewrite it into 2-4 sentences, I might lose the structured spec format which is likely what the client wants as the "short product description" (sometimes clients copy-paste spec tables as descriptions). So preserving the structure but cleaning the HTML is the safest and most accurate approach.

Let's do a quick pass over the text to see if there are any typos or issues.
"Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g" -> 10 g is very light for RAM, but RAM sticks are indeed very light (usually around 30-50g, but 10g is possible for bare stick without heavy heatsink). I must not change it.
"Item Height: 6.5 Inches", "Item Width: 9.7 Inches" -> these are the dimensions of the packaging or the stick oriented in a certain way. I will keep them exactly.

Let's format the output exactly as:

Brand: ADATA
Series: Premier 8GB 3200MHz DDR4 U-DIMM Desktop Memory
Colour: Green
Form Factor: DIMM
Item Height: 6.5 Inches
Item Width: 9.7 Inches
Product Dimensions: 2.79 x 24.64 x 16.51 cm; 10 g
Item model number:</

SKU: 1081763

View Product

Compare

RAM

CORSAIR VENGEANCE LPX 8GB DDR4 3200MHZ RAM CMK8GX4M1E3200C16

RAM

CORSAIR VENGEANCE LPX 8GB DDR4 3200MHZ RAM CMK8GX4M1E3200C16

0 out of 5

(0)

“`html

Memory Size: 8GB (1 x 8GB)
Tested Latency: 16-20-20-38
Tested Speed: 3200 MT/s
Tested Voltage: 1.35
SPD Voltage: 1.2V
Speed Rating: PC4-25600 (3200MHz)
SPD Speed: 2133MHz
SPD Latency: 15-15-15-36
Performance Profile: XMP 2.0
Package Memory Format: UDIMM

“`

SKU: 1088589

View Product

Compare

RAM

GSKILL TRIDENT Z5 RGB 32GB (2*16GB) DDR5 6000 MHZ CL36 RAM – F5-6000J3636F16GX2-TZ5RK

RAM

GSKILL TRIDENT Z5 RGB 32GB (2*16GB) DDR5 6000 MHZ CL36 RAM – F5-6000J3636F16GX2-TZ5RK

0 out of 5

(0)

Model: F5-6000J3040G32GX2-TZ5RK
Series: Trident Z5 RGB
Type: DDR5 UDIMM
Capacity: 64GB (2 × 32GB)
Speed: 6000 MHz
Latency: 30-40-40-96
Voltage: 1.4V
Lighting: RGB

SKU: 1090632

View Product

Compare

SHOPPING CART

close

Select at least 2 products
to compare